Jinan Huanqiu Glass Technology Co., Ltd.

Introduction And Principle Of Vacuum Glass

Aug 11, 2024

Introduction
Vacuum glass is a new type of glass deep-processing product. It is one of the few cutting-edge products with independent intellectual property rights in my country's glass industry. Its research and development and promotion are in line with my country's policy of encouraging independent innovation and the energy-saving policy vigorously advocated by the country. It plays a great role in energy saving and sound insulation and has good development potential and prospects.
Principle
In principle, vacuum glass can be likened to a flat thermos bottle. The similarities between the two layers of glass are that the interlayer of the two layers of glass is a vacuum with an air pressure lower than 10-1pa, so that the gas heat transfer can be ignored; the inner walls of both are coated with low-radiation film to minimize the radiation heat transfer. The differences between the two are: First, vacuum glass must be transparent or translucent for doors and windows. It cannot be coated with an opaque silver film like a thermos bottle. It is coated with a different type of transparent low-radiation film; second, from a cylindrical or spherical thermos bottle that can balance pressure to a flat plate, a "support" square array must be set between the two layers of glass to withstand an atmospheric pressure of about 10 tons per square meter, so that the glass is kept apart and a vacuum layer is formed. The spacing of the "support" array is designed according to the thickness and mechanical parameters of the glass plate, which is between 20mm-40mm. In order to reduce the heat transfer formed by the "thermal bridge" of the support and make it difficult for the human eye to distinguish, the diameter of the support is very small. The diameter of the support in the product is between 0.3mm-0.5mm, and the height is between 0.1mm-0.2mm. Vacuum glass has another better function, which is sound insulation. Because of the vacuum layer, noise cannot be transmitted, so vacuum glass can isolate 90% of the noise.
Heat transfer mechanism
Due to different structures, the heat transfer mechanism of vacuum glass and insulating glass is also different. Figure 2 is a simplified heat transfer schematic diagram. The heat transfer in the center of the vacuum glass is composed of radiation heat transfer and support heat transfer, in which residual gas heat transfer is ignored. Insulating glass is composed of gas heat transfer (including conduction and convection) and radiation heat transfer.
It can be seen that to reduce the heat transfer caused by temperature difference, both vacuum glass and insulating glass should reduce radiation heat transfer. An effective method is to use glass coated with low-emissivity film (LOW-E glass). Under the condition of taking into account other optical performance requirements, the lower its emissivity (also known as radiation rate), the better. The difference between the two is that vacuum glass should also reduce the heat transfer of the lattice support as much as possible.
The thermal insulation performance of vacuum glass is based on the principle of vacuum thermos. The thermal insulation effect of tempered vacuum glass V glass products exceeds that of a 1-meter-thick brick wall, which is 4 to 6 times that of ordinary insulating glass, and the U value (also called heat transfer coefficient or K value) is as low as 0.4 W/m2·K (European IFT laboratory report).
The sound insulation and noise reduction performance of vacuum glass is based on the fact that sound does not propagate under vacuum conditions. The weighted sound insulation of tempered vacuum glass V glass reaches 39 decibels (CTC National Inspection Group report), and the weighted sound insulation of general insulating glass is about 28 decibels.
With tempered vacuum glass V glass, the room is as quiet as a library even at an airport, viaduct or main road.
Note: The higher the weighted sound insulation, the better the sound insulation effect. For example, if the outdoor noise is 75 decibels, after using tempered vacuum glass V glass, the indoor sound is 36 decibels (75-39=36), and the library is generally below 40 decibels.
The expected life of tempered vacuum glass V glass can reach more than 25 years. It has a high vacuum cavity, which makes gas heat transfer negligible. At the same time, it uses high-performance Low-E glass to greatly suppress radiation heat transfer, ensuring that the heat transfer coefficient (U value) of V glass is as low as 0.4W/(m2·K). At the same time, the thermal insulation performance of V glass is 2-4 times that of hollow glass and 6-10 times that of single-piece glass. It can meet the requirements of the heat transfer coefficient of doors and windows of international passive houses when used independently.
Sound insulation mechanism
Vacuum glass and insulating glass are completely different in structure and production. Insulating glass is simply two pieces of glass glued together with an air layer in the middle, while vacuum glass is sandwiched between two pieces of glass with a film support, so that the two pieces of glass are completely fused in a high-temperature vacuum environment, and there is a vacuum between the two pieces of glass. In a vacuum state, sound cannot be transmitted. Of course, since the support of vacuum glass becomes a sound bridge, the vacuum degree cannot reach 100%, but these supports only account for one thousandth of the glass, and these are just tiny sound bridges that can be ignored.

goTop